Euro Migration Function - Sharp UP-3301 Instruction Manual

16

EURO Migration Function

Basically your POS terminal can be automatically modified to correspond to the introduction of EURO by
executing the operation "EURO STATUS" in X2/Z2 mode. However, there are several options you must set
depending on your need. So, please carefuly conduct necessary settings.
For details, contact your authorized SHARP dealer.
EURO status:
You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as
follows for each status. Type (A) is the base status (initial status).
From type (A)
From type (B)
From type (C)
General Z1 report
General Z2 report
GT1/GT2/GT3 memory
Exchange1 amount printing for total and change
Exchange1 amount printing for total validation print
Exchange1 calculation method
Domestic currency symbol
Domestic TAB
Exchange1 currency descriptor
Exchanger1 TAB
Conversion of the preset unit prices of Dept./PLU
(You can program in the PGM2 mode not to
convert the preset unit prices of Dept./PLU.)
The marked items "—" is remaining the current data.
Procedure
Select X2/Z2 mode
NOTE
It is executed some of following jobs which is needed for each status.
(1) Issue general Z1 report. (2) Issue general Z2 report. (3) Clear GT1/GT2/GT3. (4) Change PGM
function "Total and change amount printing — With foreign/Domestic only". (5) Change PGM function
"Exchange1 amount printing for total validation print — YES/NO" and "Total validation print amount
printing — With foreign/Domestic only". (6) Change PGM function "Exchange1 calculation method —
Division/Multiplication". (7) Set "Domestic currency symbol" as EURO symbol. (8) Set "Domestic TAB"
as 2. (9) Set "Exchange1 currency descriptor" as the suitable data. (10) Set "Exchange1 TAB" as the
suitable data. (11) Convert the preset unit prices of Dept./PLU.
NOTE
This job cannot set below additional EURO function. Below items must be set by each PGM job after this
job.
(1) Exchange1 rate, (2) "Check, Credit operation for Exchange1 — YES/NO"
240
selectable
selectable
selectable
Items
6 EURO STATUS
Type (B), (C), or (D)
Type (C), (D)
Type (D)
Type (B) Type (C)
ISSUE ISSUE
ISSUE ISSUE
— CLEAR
YES YES
YES YES
DIVISION MULTI
— [EURO]
—
The current
[EURO] domestic
currency symbol
The current
2
domestic TAB2
— CONVERT
LIST Select B, C, or D
Type (D)
ISSUE
ISSUE
CLEAR
NO
NO
MULTI
[EURO]
2 2
—
—
CONVERT
ENTER