Euro Migration Function - Sharp XE-A207W Full Detailed Instruction Manual

c
EURO Migration Function
Basically your register can be automatically modified to correspond to the introduction of EURO by executing
the operation "EURO STATUS" in X2/Z2 mode. However, there are several options you must set depending
on your need. Carefully conduct necessary settings.
EURO status:
You can select status from following 4 types ((A), (B), (C), or (D)). And the selectable type is decided as
follows for each status. Type (A) is the base status (initial status).
From type (A) ———— selectable
From type (B) ———— selectable
From type (C) ———— selectable
Items
1 General Z1 report
2 General Z2 report
3 GT1/2/3 & Training GT
4 Convert the unit price of DEPT/PLU*
EX1 AMOUNT PRINTING FOR
5
TOTAL AND CHANGE
6 EX1 CALCULATTION METHOD
7 EX1 currency symbol
8 EX1 TAB
9 Domestic currency symbol
10 Domestic TAB
Rounding SYSTEM (Denmark/
11
Sweden/Normal)
Rounding up/down of the unit digits
12
of AMOUNT
Lowest digit entering limitation of
13
item
Lowest digit entering limitation of
14
payment
15 Difference memory
16 Rounding of foreign currency for EX1
The marked items "—" is remaining the current data.
*: The preset rate of the Exchange1 is applied as the conversion rate, and the calculation method is set to
"division". When the conversion has been made, the message "PRICE CONVERTED" is printed on the
report.
Type (B), (C), or (D)
Type (C), (D)
Type (D)
Type (B)
ISSUE
ISSUE
—
— CONVERTING
YES
DIVISION
[EURO]
currency symbol
2
domestic TAB
—
—
—
—
—
—
—
ROUND OFF
(4DOWN-5UP) (4DOWN-5UP)
119
Type (C)
ISSUE
ISSUE
CLEAR
CONVERTING
YES
MULTI.
The current
domestic
The current
[EURO]
2
Normal
No
Arbitrary
Arbitrary
No
ROUND OFF ROUND OFF
(4DOWN-5UP)
Type (D)
ISSUE
ISSUE
CLAER
NO
MULTI.
—
—
[EURO]
2
Normal
No
Arbitrary
Arbitrary
No