Drink Dispenser Preset - Sharp UP-3301 Instruction Manual

I Drink dispenser preset
Procedure
214
Program each item as follows:
• VALUE NUMBER (Use the numeric entry)
• You can set the link of sort number of drink dispenser and
PLU code.
AAA: Value in the hundred thousand's and ten thousand's
and thousand's place of a PLU code (0 through 999)
• The conversion of a sort number to a PLU code is made as
follows:
Sort number = xxx (max. 3 digits)
PLU code = AAAxxx (max. 6 digits)
NOTE
You cannot change the setting by this option while the received
data on drink dispenser sales is stored in the buffer. In this case,
a lock error will occur and the message "ENTRY ERROR" will be
displayed.
• SEPARATE CODE (Use the numeric entry)
Enter a GLU/PBLU or drive-through separate code
(1 through 999999).
For example, if you program "10" for the separate code,
Separate codes "1" through "9" are used for GLU codes, and
"10" through "999999" are used for drive-through codes.
• CONNECTION (Use the selective entry)
OFF-LINE: Makes drink dispenser off-line.
ON-LINE: Makes drink dispenser on-line.
If "OFF-LINE" is selected, data reception from the drink
dispenser is disabled. If "ON-LINE" is selected, the manual
entry of PLU assigned to the drink dispenser sales article
results in error correction of drink dispenser misoperation.
• PRINT FORMAT (Use the selective entry)
NOT PRINT: Does not print a drink dispenser misoperation
item when reading a drink dispenser
misoperation file (in the clerk report).
PRINT: Prints a drink dispenser misoperation item
when reading a drink dispenser misoperation
file (in the clerk report).