Table of Contents
Advertisement
Installing the Batteries for the Remote Control
Install two AA size (R-6) batteries (supplied) matching the polarity
indicated inside battery compartment of the remote control.
Hint
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Operable Range
Keep in mind the following when using the remote control:
• Make sure that there is no obstacle between
the remote control and the remote sensor on the VCR/DVD.
• The maximum operable range as follows;
Beeline:
Either side of centre: approximately 5 m (16 feet) within 30 degrees
Above:
Below:
Buttons for DVD Only
Media type
Button
(Alphabetical order)
Downloaded from:
http://www.usersmanualguide.com/
A
BOUT THE
approximately 7 m (23 feet)
approximately 5 m (16 feet) within 15 degrees
approximately 3 m (10 feet) within 30 degrees
• Repeats playback of a selected section. • Repeats playback of a selected section. • Repeats playback of a selected section
• Press to change the camera angle to
see the sequence being played back
from a different angle (DVD-Video).
• Press to select DVD output mode and
to use the remote control in DVD
mode.
• Press to accept a setting.
• Press to adjust the black parts of the
picture brighter.
• Press to call back the Marker display.
• Activates Virtual Surround or Rapid
Play.
• Repeats playback of the current disc,
title or chapter.
• Returns to the previous operation.
• Press to enter the setup mode or to
change setup items.
• Press to skip chapters or titles.
• Press to select a desired subtitle lan-
guage.
• Displays the title menu.
• Enlarges part of a DVD-reproduced
image.
R
C
EMOTE
ONTROL
DV-NC230
OPERATE
OPEN/CLOSE
PULL OPEN
STOP/
OUTPUT
REW
FF
EJECT
PLAY
REC
CH
VCR
TIMER
(TRACKING)
DVD mode
—
• Press to select DVD output mode and
to use the remote control in DVD
mode.
• Press to accept a setting.
• Press to adjust the black parts of the
picture brighter.
—
—
• Repeats playback of the current disc,
group or track.
• Returns to the previous operation.
• Press to enter the setup mode or to
change setup items.
• Press to skip tracks.
• Press to select a desired subtitle lan-
guage.
• Press to return to the first hierarchy
in the programme and file list when
the file list is the second hierarchy or
deeper.
• Enlarges part of a reproduced image.
– 8 –
DVD
STOP
PLAY
(VCD, CD).
—
• Press to select DVD output mode and
to use the remote control in DVD
mode.
• Press to accept a setting.
• Press to adjust the black parts of the
picture brighter (VCD).
• Press to call back the Marker display
(VCD, CD).
• Activates programmed playback, ran-
dom playback or folder playback mode
(CD, MP3, JPEG).
• Activates the 3D sound (VCD, CD) .
• Repeats playback of the current disc,
group or track.
• Returns to the previous operation.
• Press to enter the setup mode or to
change setup items.
• Press to skip tracks.
—
• Press to return to the first hierarchy
in the programme and file list when
the file list is the second hierarchy or
deeper (MP3, JPEG).
• Enlarges part of a reproduced image
(VCD, JPEG).
EN
Advertisement
Table of Contents
