Connection To An Audio System; Preparation For Use; Turn On The Vcr/Dvd For The First Time; Automatic Channel Preset - Sharp DV-NC230S Operation Manual

Connection to an Audio System

Playing 2 channel audio
Connecting the VCR/DVD to audio equipment provides normal ste-
reo sound, plus powerful stereo sound enhanced by Dolby Digital 5.1
channel surround sound, DTS and MPEG audio.
AUDIO
Stereo system
VCR/DVD
ANALOG
AUDIO OUT
Setting
Connection
Connecting to Stereo System.
* To complete these settings, refer to pages 30, 32.
Hint
• Playing back a DVD using incorrect settings may generate noise
distortion and may also damage the speakers.
• ANALOG AUDIO OUT jacks are not available on the DTS audio.
C Digital Connection to Audio Equipment or MD deck without a Dolby Digital Decoder
• Audio CD
Audio CDs can be transferred digitally to other equipment such as an MD deck or DAT
deck, play the disc as you would normally with the connection shown above, right. Audio
CDs recorded in the DTS format cannot be transferred digitally or via analogue.
• Some Audio CDs have a short silent section between musical tracks. When sound from
discs such as these is digitally recorded by connecting the VCR/DVD directly to a digital
recorder (such as an MD deck or DAT deck), the music may be recorded continuously and
track numbers may be lost.
• DVD
DVDs recorded in Dolby Digital 5.1 channel surround sound, DTS or MPEG Audio cannot be
connected digitally to external recording equipment such as an MD deck or DAT deck.
It may be possible to record "Dolby Digital" or "MPEG" Audio via a digital connection if the
VCR/DVD output is set to "DPCM" (see page 32 "AUDIO Setting"). Analogue recording is pos-
sible but not for DTS recorded audio.
Operations described after this section are mainly based on the remote control use. Some operations can be carried out on main unit.

Turn on the VCR/DVD for the First Time

VCR DVD
press
1 2 3
4 5 6
7 8 9
0 +10
PLAY
STOP
VCR/DVD COMBINATION NA527AD
Refer to page 7 to switch between the VCR mode and the DVD mode.
Turn on the TV and select an appropriate external input mode on
1.
the TV until the VCR/DVD's picture appears.
Select the desired language.
2.
or

Automatic Channel Preset

VCR DVD
press
1 2 3
4 5 6
7 8 9
0 +10
PLAY
STOP
VCR/DVD COMBINATION
NA527AD
You can programme the tuner to scan all the channels you can
receive in your area.
Downloaded from: http://www.usersmanualguide.com/
Analogue audio
L R
input jacks
Audio cable
(commercially
available)
SETUP > (QUICK) >
DOLBY DIGITAL DTS
DPCM OFF
P
REPARATION FOR
first.
LANGUAGE
B[ ENGLISH ]
FRANÇAIS
ESPAÑOL
DEUTSCH
ITALIANO
SVENSKA
To decide.
NEDERLANDS
first.
Playing Dolby Digital (5.1 channel audio),
Connecting an amplifier with a Dolby Digital/ DTS/ MPEG audio digital surround processor to
your VCR/DVD' s audio digital jack provides richer and more powerful audio play. This connec-
tion is not possible if the processor or amplifier to which you want to connect does not have
an audio digital input jack.
Dolby Digital decoder,
DTS decoder, MPEG decoder,
MD deck or DAT deck
Connection
MPEG
Connecting to a Dolby
DPCM
Digital, DTS decoder or MPEG
decoder for Dolby Digital, DTS
or MPEG audio output.
Connecting to the other
equipment (an MD deck or
DAT deck etc.) without Dolby
Digital decoder.
* To complete these settings, refer to pages 30, 32.
Hint
• The DVD AUDIO OUT and DIGITAL AUDIO OUT jacks are only useful in DVD mode.
• The audio source on a disc in a Dolby Digital 5.1 channel surround format cannot
be recorded as digital sound by an MD or DAT deck.
• Playing back a DVD using incorrect settings may generate noise distortion and
may also damage the speakers.
• By hooking this VCR/DVD up to a Multi-channel Dolby Digital decoder, you can
enjoy high-quality Dolby Digital 5.1 channel surround sound as heard in the
movie theatres.
• By hooking this VCR/DVD up to the DTS decoder, you can enjoy 5.1 channel sur-
round system which reproduces the original sound as truthfully as possible. 5.1
channel surround system is developed by the Digital Theater System Inc.
U
SE
Select "INITIAL".
1.
Select "CH TUNING".
2.
or
Select "AUTO".
3.
or
• The tuner scans and memorises all the active
channels in your area.
• After scanning, the tuner stops on the lowest
memorised channel.
– 11 –
DTS or MPEG audio
COAXIAL
DIGITAL
AUDIO OUT
SETUP >
Setting
DOLBY DIGITAL DTS
BITSTREAM
DPCM OFF
or
To decide.
To decide.
To decide.
Audio digital
input jack
Audio coaxial
digital cable
(commercially
available)
(QUICK) >
MPEG
DPCM
MENU
TIMER
SET UP
B INITIAL
INITIAL
B CH TUNING
CLOCK
LANGUAGE
CH TUNING
B AUTO
MANUAL
MOVE
AUTO P01
CC
EN