Employee - Sharp ER-A770 Instruction Manual

Employee

You can program various items for each employee.
Procedure
Pertinent
employee code
176
Program each item as follows:
• EMPLOYEE (Use the numeric entry)
• SECRET CODE (Use the numeric entry)
• NAME (Use the character entry)
• *
• MANAGER CODE (Use the numeric entry)
E
• DAILY WORK TIME (Use the numeric entry)
• *
*
1
*
2
Employee code (max. 10 digits: 0000000001 to 9999999999)
Secret code (max. 4 digits: 0001 to 9999)
Name for the employee. Up to 12 characters can be entered.
CLERK CODE (Use the numeric entry)
1
Clerk code (max. 4 digits: 0001 to 9999)
Manager code (max. 2 digits: 01 to 99)
The manager who is responsible or capable for adjustments
to the employee's hours.
Standard number of hours for which the employee should
work a day (max. 3 digits: 0 to 99.9)
LOCATION#1 through #7 (Use the numeric entry)
2
Job location table number (max. 2 digit: 01 to 99)
NOTE
The clerk whom an employee code has been assigned cannot
time in unless the corresponding employee times in.
If no job location table number is programmed for an employee
time-in operation, the location no. 1 will be assigned.
Therefore, make sure to program a job location table number
for "LOCATION#1."