Link Plu Table - Sharp ER-A770 Instruction Manual

Link PLU table

It is possible to link PLUs together so that all PLUs linked together are rung up upon a single key
depression. However, the number of links is a maximum of five. Even if more than five PLUs are linked, the
sixth or higher link is not actualized.
Procedure
Selected
E
link PLU
table no.
Program each item as follows:
• LINK PLU TABLE (Use the numeric entry)
Link PLU table number (1 through 99)
• LINK PLU #X
Enter linked PLU codes (max. 5 PLUs).
NOTE
• PLU codes should be defined before programming a link PLU
table.
D
• If the key is pressed on the table number selection menu,
the selected table will be deleted.
143