Sharp ER-A770 Instruction Manual page 134

Department (continued)
• RECEIPT TYPE (Use the selective entry)
Receipt type selection (When the receipt type is "single/double" or "single/double + addition.")
DOUBLE: Double receipt type
SINGLE: Single receipt type
• AMT. ENTRY TYPE (Use the selective entry)
Type of unit price entry for departments
OPEN & PRESET: Open & preset
PRESET:
OPEN:
INHIBIT:
• TAXABLE 1 through 6 (Use the selective entry)
Tax status
YES : Taxable
NO : Non-taxable
NOTE
• The tax system of your POS terminal has been factory-set to automatic VAT1 - 6. If you desire to select
any of automatic tax 1 - 6, manual VAT1 - 6, manual VAT1, manual tax 1 - 6, and the combination of the
automatic VAT 1 - 3 and the automatic tax 4 - 6, contact your authorized SHARP dealer.
• When the combination of the automatic VAT1 - 3 and automatic tax 4 - 6 system is selected, one of the
taxable 1 - 3 can be selected in combination with taxable 4 - 6.
• HALO (Use the numeric entry)
• You can set an upper limit amount (HALO) for each department. The limit is effective for the REG-
mode operations and can be overridden in the MGR mode.
• AB is the same as A x 10
A: Significant digit for HALO (1 through 9)
B: Number of zeros to follow the significant digit for HALO (0 through 8)
• COMMIS. Gr. No. (Use the numeric entry)
Commission group number (1 through 3)
If the number "0" is entered, no commission group number will be assigned to a department.
You can assign each department to a commission group.
• OUTPUT KP No. 1 and No. 2 (Use the numeric entry)
ID number of the network remote printer 1 or 2 (1 through 9)
If the number "0" is entered, no remote printer will operate.
• RECEIPT PRINT (Use the selective entry)
YES: Prints the department sales information on the receipt.
NO: Prints nothing on the receipt.
• PRNT ON CLK REPO (Use the selective entry)
YES: Prints the department sales information on the clerk report.
NO: Prints nothing on the clerk report.
Preset only
Open only
Inhibited
B
133