How To Use The Remote Control - Sharp CV-P09FR Installation And Operation Manual

HOW TO USE THE REMOTE CONTROL

Point the remote control towards the
units signal receiver window and
press the desired button. A beep will
sound when the unit receives the
signal.
• Make sure nothing, such as curtains,
blocks the signal receiver window.
• The remote control operates up to 7
meters away.
CAUTION
• Do not expose the signal receiver window to direct sunlight. This may adversely
affect its operation. If necessary, close the curtains to block out the sunlight.
• Use of a fluorescent lamp in the same room may interfere with transmission of the
signal.
• The unit may be affected by signals emitted from other remote controllers for televi-
sions, VCRs or other equipment used in the same room.
• Do not leave the remote control exposed to direct sunlight or near a heater. Protect
the remote control from moisture and shock which can discolor or damage it.
To prevent the remote control from
being misplaced, hook it to the unit
when not in use.
When attached, to remove the remote
control from the unit, lift the remote
control up slightly and pull it out.
E-7
Remote control hook