Basic Operation - Sharp AY-249E-T Operation Manual

PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP PP @@ @@ @@ @@ PP PP @@ @@ PP PP @@ @@ PP PP PP PP PP PP @@ @@ @@ @@ PP PP @@ @@ @@ @@ @@ @@ PP PP @@ @@ @@ @@ @@ @@ PP PP @@ @@ @@ @@ @@ @@ PP PP @@ @@ @@ @@ @@ @@ PP PP @@ @@

BASIC OPERATION

AM
1H
MODE
3
2
5
4
FAN
1
SWING
SET/C
+ -
1 Press the MODE button to select the operation
mode.
AUTO
Press the ON/OFF button to start operation.
2
» The red OPERATION lamp (
will light.
Press the THERMO. button to set the desired
3
temperature.
» In the AUTO and
DRY mode, the indi-
cator bars represent
changes in tempera-
ture.
» In the COOL and HEAT mode, the tempera-
ture can be set within the range of 18 to 32
°C.
» In the FAN ONLY mode, the temperature
setting cannot be made.
Press the FAN button to set the desired fan
4
speed.
AUTO
» In the DRY mode, the fan speed cannot be
changed.
» In the FAN ONLY mode, the fan speed can-
not be set to AUTO.
To turn off the unit, press the ON/OFF button
5
again.
» The red OPERATION lamp (
will turn off.
E-6
HEAT COOL DRY FAN ONLY
) on the unit
HIGH LOW SOFT
) on the unit
2°C higher
1°C higher
1°C lower
2°C lower