Related Manuals for Sharp Plasmacluster AE-X30EJ
Summary of Contents for Sharp Plasmacluster AE-X30EJ
- Page 1 Air Conditioner AY-XP30EJ SPLIT TYPE ROOM AIR CONDITIONER OPERATION MANUAL INDOOR UNIT OUTDOOR UNIT AY- XP30EJ AE - X30EJ *Plasmacluster is a trademark of Sharp Corporation.
-
Page 3: Table Of Contents
ENGLISH Thank you for purchasing a SHARP air conditioner. Please read this manual carefully before operating the product. CONTENTS • PRECAUTIONS ........1 • TIPS ABOUT PLASMACLUSTER OPERATION ..12 • ADDITIONAL NOTES ON OPERATION ..3 • PLASMACLUSTER OPERATION ....13 •... - Page 4 PRECAUTIONS CAUTIONS FOR USE If a gas appliance is used in the same room as the air conditioner, ventilate the room periodically to prevent oxygen depletion. For safety, do not touch the unit with wet hands, it may cause an electric shock. For safety, turn the circuit breaker off when not using the unit for an extended period of time.
-
Page 5: Additional Notes On Operation
ADDITIONAL NOTES ON OPERATION OPERATING TEMPERATURE RANGE • The built-in protective INDOOR TEMP. OUTDOOR TEMP. device may prevent the 32˚C D.B. 46˚C D.B. unit from operating when upper limit 23˚C W.B. used out of this range. COOLING 21˚C D.B. 21˚C D.B. lower limit •... -
Page 6: Part Names
PART NAMES INDOOR UNIT 1 Inlet (Air) 2 Open Panel 3 AUX. Button 4 Air Filters 5 Receiver Window 6 Louvre Unit Open to clean the inside of the air conditioner. 7 Indicator Panel 8 Vertical Adjustment Louvres 9 Horizontal Adjustment Louvres 0 Outlet (Air) q Remote Control w FULL POWER Lamp (green... -
Page 7: Remote Control
REMOTE CONTROL 1 TRANSMITTER 2 DISPLAY (Liquid Crystal Display) 3 PLASMACLUSTER Button 4 DISPLAY Button 5 ON/OFF Button 6 THERMO. (Thermostat) Button 7 FULL POWER Button 8 MODE Button 9 ONE-HOUR OFF TIMER Button 0 TIMER ON Button (for setting the timer) DISPLAY q TIMER OFF Button (for setting the timer) w SELF CLEAN Button... -
Page 8: Using The Remote Control
USING THE REMOTE CONTROL LOADING BATTERIES Use two size-AAA (R03) batteries. Remove the remote control cover. Remote control cover Insert batteries in the compart- ment, making sure the ± and — polarities are correctly aligned. • The display indicates "AM 6:00"... -
Page 9: Set Current Clock Time
CAUTION • Do not allow the signal receiver window to receive strong direct sunlight, since it can adversely affect its operation. If the signal receiver window is exposed to direct sunlight, close a curtain to block the light. • Using a fluorescent lamp with a quick starter in the same room may interfere with transmission of the signal. -
Page 10: Basic Operation
BASIC OPERATION Press the MODE button to select the op- eration mode. AUTO HEAT COOL Press the ON/OFF button to start opera- tion. • The red OPERATION lamp ( ) on the unit will light. Press the THERMO. button to set the de- sired temperature. - Page 11 TIPS ABOUT AUTO MODE In the AUTO mode, the temperature setting and mode are automatically se- lected according to the room temperature and outdoor temperature when the unit is turned on. Modes and Temperature Settings outdoor (¡C) temp. Cool Cool Cool ( 4¡C) ( 5¡C)
-
Page 12: Adjusting The Air Flow Direction
ADJUSTING THE AIR FLOW DIRECTION VERTICAL AIR FLOW DIRECTION The air flow direction is automatically preset in each mode as follows for optimum comfort: COOL and DRY modes Horizontal air flow HEAT mode Diagonal air flow HOW TO ADJUST THE AIR FLOW DIRECTION Adjustment range Press the SWING button on the remote control once. -
Page 13: Full Power Operation
FULL POWER OPERATION In this operation, the air conditioner works at maximum power to makes the room cool or warm so rapidly that you can use it just after you come home. To activate the FULL POWER operation, press the FULL POWER button during operation. -
Page 14: Tips About Plasmacluster Operation
TIPS ABOUT PLASMACLUSTER OPERATION The ionizer inside the air conditioner will release Plasmacluster ions, which are collective mass of positive and negative ions, into the room. The Plasmacluster ions reduce airborne mold fungus. Ionizer Plasmacluster ions AIR CLEAN OPERATION Plasmacluster ions released into the air will reduce airborne mold fungus. ION BALANCE OPERATION It is said that plenty of negative ions exist in places such as waterfalls or waterside in natural environment. -
Page 15: Plasmacluster Operation
PLASMACLUSTER OPERATION You can choose AIR CLEAN OPERATION or ION BALANCE OPERATION During operation, press the PLASMACLUSTER button to select the mode. AIR CLEAN ION BALANCE CANCEL REMOTE CONTROL DISPLAY GREEN lamp lights up Lamp goes off BLUE lamp lights up PLASMACLUSTER lamp on the unit •... -
Page 16: Timer Operation
TIMER OPERATION NOTE: Before setting the timer, make sure the clock is properly set with the current time. TIMER OFF Press the TIMER OFF ( ) button. The TIMER OFF indicator will blink; press the TIME ADVANCE or REVERSE buttons to set the desired time. -
Page 17: Timer On
TIMER ON Press the TIMER ON ( ) button. The TIMER ON indicator will blink; press the TIME ADVANCE or REVERSE buttons to set the de- sired time. (The time can be set in 10-minute increments.) Point the remote control at the signal receiver window on the unit and press the TIMER SET (SET/C) button. -
Page 18: Auxiliary Mode
AUXILIARY MODE Use this mode when the remote control is not available. TO TURN ON Lift the front panel of the indoor unit and press the AUX. button on the operation panel. • The red OPERATION lamp ( ) on the unit will light and the unit will start operating in the AUTO mode. -
Page 19: Cleaning The Filters
MAINTENANCE Be sure to disconnect the power cord from the wall outlet or turn off the circuit breaker before performing any maintenance. CLEANING THE FILTERS The air filters should be cleaned every two weeks. TURN OFF THE UNIT REMOVE THE FILTERS 1 Lift the open panel. -
Page 20: Before Calling For Service
BEFORE CALLING FOR SERVICE The following conditions do not denote equipment malfunctions UNIT DOES NOT OPERATE SWISHING NOISE The unit will not operate if it is turned on The soft, swishing noise is the sound of the immediately after it is turned off. The unit will refrigerant flowing inside the unit. -
Page 21: Specifications
SPECIFICATIONS Indoor unit AY-XP30EJ Outdoor unit AE-X30EJ Rated A.C. voltage (V) 230-240 Rated freuency (Hz) Cooling capacity (kW)* Heating capacity (kW)* *When tested in accordance with AS/NZS3823.1.1. - Page 22 SHARP CORPORATION OSAKA, JAPAN Printed in Thailand TINSEA364JBRZ 03MO...