Basic Operation - Sharp AH-A24FEF Operation Manual

BASIC OPERATION

TIPS ABOUT AUTO MODE
In the AUTO mode, the temperature set-
ting and mode are automatically selected
according to the room temperature when
the unit is turned on.
Modes and Temperature Settings
Room temp.
Automatic Operation
at operation
start-up
Mode Temperature Setting
Below 24°C DRY Room Temp. at start-up
24°C-26°C COOL
26°C-28°C COOL
Above 28°C COOL
1
2
2
5
3
3
1
4
4
5
24°C
25°C
26°C
10
Press the MODE button to select
the operation mode.
AUTO COOL
Press the ON/OFF button to start
operation.
• The red OPERATION lamp (
unit will light.
Press the TEMP. button to set the
desired temperature.
AUTO/DRY MODE
The temperature can be changed in 1°C
increments within the range of 2°C higher
to 2°C lower from the temperature auto-
matically determined by the air conditioner.
COOL MODE
The temperature can be set within the
range of 18 to 32°C.
Press the FAN button to set the
desired fan speed.
AUTO SOFT LOW
• In the DRY mode, the fan speed is pre-
set to AUTO and cannot be changed.
To turn off the unit, press the ON/
OFF button again.
• The red OPERATION lamp (
unit will turn off.
DRY
) on the
HIGH
) on the