Using The Remote Control; Using The Navigation Buttons - Epson PowerLite 6110i User Manual

Powerlite 6110i multimedia projector user'sguide
Hide thumbs Also See for PowerLite 6110i:
Table of Contents

Advertisement

note
If a button is pressed longer
than 60 seconds, the remote
control stops operating to
conserve power. When you
release the button, normal
operation resumes.
note
The projector has equivalent
buttons that you can use on
its control panel:
Menu
Esc
button
button
Arrow buttons
Enter button

Using the Remote Control

42
Using the Remote Control
Before using the remote, make sure batteries are installed as described
on page 43. Then, refer to the tips below:
Point the remote control either at the front or back of the
projector, or at the screen.
Stand within about 30 feet of the projector.
Avoid using the remote under bright fluorescent lamps or in
direct sunlight, or the projector may not respond properly.

Using the Navigation Buttons

The remote control has various buttons that let you navigate the
projector's help and menu systems; they also let you use the drawing
tools to highlight your presentation.
Enter button
For details on using the buttons to control specific features, see the
following sections:
to navigate the projector's menu system, see page 52
to use the projector's help system, see page 94
to highlight your presentation, see page 46
Pointer button
(controls pointer
movement)
Esc button

Advertisement

Table of Contents
loading

Table of Contents