Epson PowerLite 6110i User Manual page 99

If you're using a PC notebook:
■ Hold down the
Fn
key that lets you display on an external monitor. It may have an
icon such as
seconds for the projector to sync up after pressing it. Check your
notebook's manual or online help for details.
On most systems, the
screen and the projector, or display on both at the same time.
Depending on your computer's video card, you might need to use
■
the Display utility in the Control Panel to make sure that both the
LCD screen and external monitor port are enabled. See your
computer's documentation or online help for details.
If you're using Mac OS X:
1. Open
System Preferences
2. Double-click
Displays
3. Make sure the
VGA Display
4. Click the
Arrange
5. Make sure the
Mirror Displays
The message
Not Supported
■ Make sure the correct input signal is selected in the Settings menu
(see page 57).
■ Make sure your computer's resolution doesn't exceed UXGA
(1600 ×1200), and the refresh rate is supported by the projector
(see page 116). If necessary, change your computer's resolution
setting as described in the following section.
Only part of the computer image is displayed.
Press the button on the remote control.
■
Auto
■ Make sure the image
menu. See Chapter 4 for more information.
key on the keyboard and press the function
, or it may be labelled
CRT/LCD
key lets you toggle between the LCD
.
.
or
Color LCD
tab.
checkbox is selected.
is displayed.
setting is correct on the Signal
Position
. Allow a few
dialog box is selected.
Solving Problems
99