Selecting The Image Source - Epson PowerLite 6110i User Manual

note
To focus and adjust the
image, see page 35. If a
projected image fails to
appear, see page 33 for help.
Projecting
32

Selecting the Image Source

Selecting the image source lets you switch between images input from
different pieces of equipment connected to the projector (such as a
computer or DVD player).
If you don't see the image you want, select it using the
button on the projector or the
Search
remote control.
The buttons work as follows:
Source
■ Use the
Source Search
connected to the
Computer1
ports.
S-Video
The remote control has four
■
between equipment connected to the port identified on each
button.
Note that the
Computer1
different input signals (for example, Analog RGB or RGB Video)—so
if you have equipment connected to one of these ports, it's important
to make sure the correct signal is selected to match the equipment
you're using. You can change the input signal settings using the
projector's menu system; see page 56.
buttons on the
Source
button to switch between equipment
, ,
Computer2 Video
buttons. Use them to switch
Source
and ports can be set up to use
Computer2
Source
, and