Connecting to a Projector on a Network and Projecting
Switch toolbar display
You can switch the toolbar display as shown below. The toolbar display
you select remains in effect the next time you use EMP NS Connection.
Full
Normal
Simple
When The Target Projector is Not Found
Action 1. Restart the computer.
Action 2. Check if the projector network settings are set to "Quick
Connection Mode".
information.
Action 3. Check the following if actions 1 and 2 do not help. (If it is
disconnected, check the following.)
See the projector User's Guide for more
Is the indicator on the
wireless LAN unit
Not flashing
flashing?
Flashing
Are you using
commercially available
Yes
firewall software?
No
Are any of the supplied
utilities operating from
the computer's wireless
Yes
LAN unit?
No
Contact Epson as described in the
User's Guide.
22
Reinstall the wireless LAN
unit.
Create a firewall exception
for EMP NS Connection in
the firewall software you are
using.
Close the utility and restart
EMP NS Connection.