Epson PowerLite 1725 Operation Manual page 90

Troubleshooting
Check
Is the network cable connected correctly?
For Wired LAN
Cannot connect in "Advanced Connection Mode" or wired LAN connection
f
Check
Are the SSID for the computer, access point, and
projector different?
Are the WEP keys set properly?
Are the connection denial functions, such as MAC
address restrictions and port restrictions, set correctly
at the access point?
Are the IP address, the subnet mask, and the gateway
address for the access point and the projector set
correctly?
Are the access point and the projector's subnet
different?
f The Slide show cannot be displayed on the desired display when using the multi-screen display.
Check
Are you using PowerPoint 2002 or an earlier version?
For Windows
Applications are no longer displayed from the computer's screen when using the multi-screen display.
f
Check
Is another application running on the virtual display?
For Windows
Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected
properly.
Set the computer, the access point, and the projector to the same SSID. See the projector User's Guide for
more information.
When selecting WEP from "Security", set the access point, the computer, and the projector to the same WEP
key. See the projector User's Guide for more information
Set the projector to allow connections from the access point.
When not using a DHCP, adjust each setting. See the projector User's Guide for more information.
Select "Manual search" from EMP NS Connection, specify the IP address, and connect.
p.40
s
To set and use two or more virtual displays, use PowerPoint 2003, or limit the number of virtual displays to
one before displaying the Slide show.
When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. If this
happens, set "EPSON Virtual Display" to "Off" in "Screen properties".
Remedy
Remedy
Remedy
Remedy
90