Epson PowerLite 1725 Operation Manual page 19

Connecting to a Projector on a Network and Projecting
Automatic search
In "Advanced Connection Mode", you can search for available projectors
on the network system that the computer is connected to.
In "Quick Connection Mode", you can search for the projector based on
the SSID.
Manual search
In "Advanced Connection Mode", you can search for a projector based on
a specified IP address or projector name.
In "Quick Connection Mode", you can search for the projector based on
the SSID selected from a list.
Profile
You can search for a projector on the network using a profile saved with
"Save profile". s p.41
Status
The following six icons indicate the status of the discovered projectors.
Standby
Busy
Busy (Disable
interrupt
connection)
Currently in
use by
another
application
Searching
Select for connecting.
Select for connecting. When you click
"Connect", the computer currently connected is
disconnected and your computer is connected.
Cannot be selected. "Disable interrupt
connection" is set
on the other computer and it is already
connected.
The projector's configuration menu is open. You
can select it after closing the configuration
menu and running the search again.
Displayed while running "Manual Search" or
"Profile".
Not found
Displayed when a projector cannot be found as
a result of "Manual Search" or "Profile".
In "Quick Connection Mode", you can only select those with the same
SSID.
Projector name
The projector's name is displayed.
IP Address ("Advanced Connection Mode" only)
The projector's IP address is displayed.
SSID ("Quick Connection Mode" only)
The projector's SSID is displayed.
Display (When "Use multi-display" is selected)
Select the display number. s p.36
Update list ("Quick Connection Mode" only)
Updates "Status" and "Signal strength".
Save in the profile
Saves the results of a search for projectors on the network as a profile.
p.41
s
Clear list
Deletes all search result lists.
Disable interrupt connection
Select this to prevent an interrupt connection by other computers while
connected to the selected projector.
Use multi-display
Select this when using the Multi-screen display function. When this is
selected, "Display layout" and "Display properties" are displayed at the
bottom of the screen. s p.28
19