Steps For Connecting - Epson PowerLite 1725 Operation Manual

Overview of EMP NS Connection

Steps for connecting

Use the following steps to connect your computer and projector for
projection with EMP NS Connection. Although "Quick Connection
Mode" and "Advanced Connection Mode" are similar, "Advanced
Connection Mode" has some independent settings. For detailed
procedures, see examples of connecting with "Quick Connection Mode"
starting on the next page.
s
In the following flowchart, you only need to perform the light blue
sections the first time you connect.
p.16
Install EMP NS Connection on the computer to be connected
s p.10
Make network settings on the computer and put it into network
connection status p.16
s
Normally, when a computer is connected with the network and
used, you do not need to make computer network settings.
Install the supplied wireless LAN unit as described on the Quick
Setup sheet, or install the optional wired LAN adapter.
Make network settings on the projector and put it into network
connection status. See the projector User's Guide.
Start EMP NS Connection on the computer and connect with the
projector s p.17
15