Epson PowerLite 1725 Operation Manual page 91

Troubleshooting
f The mouse cursor is not displayed on the computer's screen.
Check
Is EPSON Virtual Display installed?
For Windows
The image and sound for movies with EMP NS Connection are not displayed, the image is slow to appear, or either the movie or audio stop
f
Check
Did you try to play back movies with Media Player or
try to operate the screen saver preview?
Is WEP encryption effective, or are multiple projectors
connected?
Have you enabled DHCP?
Was EMP NS Connection started while a movie was
playing, or were the resolution and color number
changed?
For Macintosh
Is wireless LAN 802.11g/b being used in "Quick
Connection Mode"?
When a connection is made using EMP NS Connection, a PowerPoint Slide show cannot be started
f
Check
Was EMP NS Connection started while PowerPoint
was starting?
For Windows
The mouse cursor was moved onto the virtual displayg. When the virtual display check box is cleared on the
"Add and Remove EPSON Virtual Display" screen, the mouse pointer returns to the screen display area.
Depending on the computer, the movie play back screen in Media Player may not be displayed, and the screen
saver preview may not be displayed normally.
The display speed decreases when WEP encryption is effective or multiple projectors are connected.
When DHCP is set to "On" in "Advanced Connection Mode" or "Wired LAN connection", if a DHCP server
is not found, it takes time to enter EasyMP standby status.
When playing back movies, start EMP NS Connection first before starting play back. If you see a problem
after you change the screen resolution or number of colors during movie playback, try moving, minimizing,
or resizing the playback window.
Depending on the electromagnetic wave environment, there are times when the image and sound for movies
may stop. When using the movie sending function, use "Advanced Connection Mode" or wireless LAN
802.11a in "Quick Connection Mode".
When connecting with EMP NS Connection, make sure you close PowerPoint first. The slide show might not
run if you start PowerPoint before EMP NS Connection.
Remedy
Remedy
Remedy
91