Setting Dpof For Multiple Still Images - Ricoh Caplio G3 Operation Manual

Setting DPOF for Multiple Still
Images
To make the DPOF setting for selected still
images all at once, follow the steps below.
Buttons used here
Turn the Mode Dial to 6 (Playback Mode).
Press the 9 (Thumbnail Display) button.
The screen is split into six sections with the still
images displayed at a reduced size.
Press the !"#$ buttons to select the first
still image for which you wish to make the
DPOF setting.
Chapter 1 / Section 5 Deleting Still Images, Movies, and Sounds
Press the M button.
The Playback menu appears.
Press the " button to select [PRINT] and
then press the O button.
The DPOF symbol appears in the upper left of the first
still image.
Press the !"#$ buttons to select the next
still image you wish to set to DPOF, and then
press the O button.
The DPOF symbol appears in the upper left of the still
image.
Repeat Step
for which you wish to make the DPOF
setting.
If you selected an image by mistake, you can deselect
it by selecting the image and pressing the O button
again.
Press the M button.
The display returns to the Thumbnail Display screen.
104
to select all the still images