Table of Contents
Advertisement
Using Auto slide show
In Auto slide show, all the images displayed as
thumbnails appear in order.
To start Auto slide show, follow the steps below.
Using one of the steps below, select [Auto
slide show].
• Select [Image] then [slide show] from the menu bar.
• Click the
button on the tool bar.
• Place the pointer of the mouse on one of the images
you selected, right click and choose [Auto-slide
show] from the menu.
The slide show begins.
The images advance automatically according to the
display interval (number of seconds) you specified in the
[slide show] dialog box.
Stop the slide show with the [Esc] Key.
Chapter 2 / Section 3 Displaying Thumbnail Image (How to Use DU-10)
How to Use the slide show
Dialog Box
You can make slide show display settings in the
[slide show] dialog box.
1. [Operating method]
Select either Auto slide show (the slides are played
automatically, in order) or Manual (switch frames by
clicking the mouse button or pressing the [Enter] key).
2. [Display interval]
Specify how long in seconds to display each image,
when using Auto slide show.
3. [Background color]
Choose a background color for your images. Click the
[Choose Color] button and choose a color from the
dialog box that appears.
4. [Display file name]
If you check this box, the file name will appear in the
bottom of the image.
5. [Maximum display]
If you check this box, your images will be displayed at
full-screen size.
6. [Playback sound]
If you check this box, and the images have associated
sounds, the sounds will also be played back.
7. [Repeat]
If you check this box, the sets of images will be shown
repeatedly, until you press the [Esc] key to stop. If you
uncheck this box, the images in the folder will be
displayed through the cycle once, then the slide show
will finish.
151
Advertisement
Table of Contents
