Protecting Multiple Still Images, Movies, Or Sounds At Once - Ricoh Caplio G3 Operation Manual

Protecting Multiple Still Images,
Movies, or Sounds at Once
To protect selected still images, movies, or
sounds all at once, follow the steps below.
Buttons used here
Turn the Mode Dial to 6 (Playback Mode).
Press the 9 (Thumbnail Display) button.
The screen is split into six sections and thumbnail
images are displayed in a reduced size.
Press the !"#$buttons to select the still
image, movie, or sound you want to display.
Press the M button.
The Playback menu appears.
To remove protection from multiple still images, movies, or sounds, follow the steps described above to select
the images, movies, or sounds and implement.
• For details on thumbnail display, see p.88.
• To remove protection for one still image at a time, see p.97.
• To remove all protection at once, see p.99.
Chapter 1 / Section 5 Deleting Still Images, Movies, and Sounds
Press the " button to select [PROTECT]
and then press the O button.
The Protect symbol appears in the upper left of the
first still image, movie, or sound.
Press the !"#$ buttons to select the still
image, movie, or sound you wish to protect
and press the O button.
The Protect symbol appears in the upper left of the
still image, movie, or sound.
Repeat Step
movies, and sounds you wish to protect.
If you selected an image by mistake, you can deselect
by selecting the image and pressing the O button
again.
Press the M button.
The display returns to the Thumbnail Display screen.
100
to select all the still images,