Inserting The Sd Memory Card - Ricoh Caplio G3 Operation Manual

Inserting the SD Memory Card

You can record the still images and movies you have taken on SD Memory Cards
(available in stores) or in the camera's internal memory.
Write-protecting your images
If you move the card's write-protection switch to LOCK, your still images cannot be
accidentally erased, and the memory card cannot be formatted. If you return the
switch to the former position, it is once again possible to erase images and format
the card.
It is recommended to switch to LOCK after recording important images.
The internal memory capacity is 8MB.
About where to record
When an SD Memory Card is not inserted, the camera records images in the internal memory; when an SD
Memory Card is inserted, it records images on the SD Memory Card.
When no memory card is loaded
Inserting the SD Memory Card
Turn the power off.
Slide the battery/card cover to open.
The cover slides two steps.
Slide the cover one step for card insertion or extraction.
Make sure the card is facing the right way
and then push the card all the way in until it
clicks
When an SD Memory Card is loaded
Records to
internal
memory
15
Chapter 1 / Section 1 Getting Started
Close and slide the battery/card cover.
When loading the SD Memory Card, take care
not to get any dirt on the card's metal parts.
Records to
SD Memory
Card