Starting The Projector With A Password - Epson EMP-821 User Manual

note
If you make a mistake
entering the time, press the
button and enter the
Esc
time again.
Fine-tuning the Projector
66
4. If you want to disable the password temporarily, select
press . Then hold down the
Enter
numeric keypad to enter the number of hours (from 0 to 9999)
that you want the password feature disabled. If you want the
projector to request the password every time it is turned on, set
the timer to . Press
0H
The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to
5. To enable your screen logo, select
. Select and press
Enter ON
When this feature is on the logo appears whenever the projector is
turned on (if the
Startup Screen
menu; see page 59) and as the A/V Mute screen (if you selected
the as the
Logo Background Color
None of the User's Logo features can be changed when the User's
Logo Protect function is enabled.
6. Press to close the Password Protect menu.
Menu
If you lose the remote control, you will not be able to enter the
password, so keep the remote control in a safe place at all times.
When the period defined in the
the password is entered correctly, the elapsed time will be reset to
and the countdown will start again. Remember to disable or change
this setting when you need to.

Starting the Projector with a Password

When the password function is enabled, you see this screen when you
turn on the projector:
button while you use the
Num
when you're done.
Enter
.)
Time elapsed
User's Logo Protect
.
Enter
is enabled in the Extended
in the Extended menu).
Time-elapsed
and
Timer
and press
setting has passed, and
0