MAINTENANCE
1) Turn the unit off and allow it to cool down to room temperature.
2) Disconnect the power source and turn off the gas supply to the
insert.
3) Open the bottom louver.
4) Remove the door frame by lifting out from the bottom and lift up off
the glass door.
5) Remove the glass door.
a) Remove the 2 screws shown below at the bottom of the glass
.
door
o
b) Swing the door out 45
out.
®
Regency
E33S-1 Sunrise Gas Insert
FAN REPLACEMENT
Glass Door
Door Frame
from the bottom and lift up and
6) Remove the burner by undoing the 2 screws shown. Carefully lift the
burner up and out ensuring not to spill glass crystals.
7) Carefully set aside the burner and glass crystals.
Burner
8) Remove the base cover by lifting up from the back and maneover out.
MAINTENANCE
Base Cover
33