Table of Contents
Advertisement
MAINTENANCE
1) Shut off the power supply.
2) Remove the top louvre.
3) Remove the glass door.
4) Unplug the 6 pin Molex connector and carefully pull out the ECS
box.
6 Pin Molex
Connector
5) Remove the electric cover by undoing the 2 screws, pull out the
grommet and the harness.
Electric Cover
32
FAN REPLACEMENT
6) Unplug the black wire from the resister.
7) Carefully slide the fan to the front left side of the unit.
8) Remove the screw which holds the ground wire and disconnect all
electrical connectors that are attached to the fan.
ECS Box
9) Pull out the fan.
10) Reverse steps to install new fan.
Ground Wire
®
Regency
PG36D Gas Log Fireplace
Advertisement
Table of Contents
