Brick Installation; Door Removal; Optional Short Leg Installation - HAMPTON BAY Hampton H200 Owners & Installation Manual

INSTALLATION

BRICK INSTALLATION

Firebrick is included to extend the life of your
stove and to radiate heat more evenly. Check
to see that all fi rebricks are in their correct
positions and have not become misaligned
during shipping.
Optional Ash Plug shown.
18

DOOR REMOVAL

1) Open door.
2) Push spring lever down while holding onto
the door.
3) Pull door down and lift out to remove. Bottom
of door lifts right out.
OPTIONAL SHORT LEG
INSTALLATION
1) Remove the cast lid from the top of the
stove.
2) Remove fan, if installed.
3) Carefully lay the unit on it's back on a soft
surface to prevent scratching.
4) Remove the 4 standard legs by undoing the
bolts.
Spring Lever
Bottom part 5) Secure the 4 short legs using the bolts
of door fi ts removed from step 4.
into slot.
6) Carefully bring stove to standing position.
7) Place cast lid back on top of stove.
8) Re-install fan, if removed.
9) Place decal 918-700 (included with cast
legs) on the back of the stove near the serial
number decal.
Hampton H200 Cast Freestanding Woodstove
Standard
Leg
Short Leg