Painted Surfaces; Control Panel - GE JGS968 Owner's Manual

ge.com
Stainless Steel Surfaces {onsome models)
Do not usea steel woolpad;it will scratch
thesurface.
To clean the stainless steel sm_i_ce,
use warn/sudsy water or a stainless steel
cleaner or polish. Mwa):s wipe the sm_i_ce
in the direction of the grain. Follow the
cleaner insmmfions fiw cleaning the
stainless steel surti_ce.
To inquire about i_urchasing stainless
steel appliance cleaner or polish, or to
find the location of a dealer or Camco
Parts Store nearest you, please call our
toll-free number:
NationalPartsCenter 1.800.626.2002 (U.S.)
1.800.661.1616 (Canada)
ge.com(U.S.)
www.GEAppliances.ca (Canada)
Painted Surfaces
Painted surii_ces include the top and
sides _ff the (loo_; and the drawer fl'ont.
Clean these _fl_ soap and water or
a \'inegar and water solution.
Do not rise COillillei'cial oxen cleanei_,
cleanino_ powde_, steel wool or hm_h
abrasixes on any painted surli_ce.
Oven Vent
The oven is vented through an opening
in the cooktop under the grille.
Ne\'er cover the opening with aluminum
foil or anv other material. This would
prevent the oven vent fl'om working
I) roI)erly:
Control Panel
If desked, the
touch
pads may be turned of
before cleaning.
See the
ControlLockoutsection.
Clean up splatte_ with a damp cloth.
_)tl II/ay
also tlse a glass cleaner
Remove heavier soil with wam_ soap)'
water: Do not use abrasives of any
kind.
Turnon the touch pads after cleanlbg.
Oven floor,
Removable OvenFloor
To remove the oven floor for easier
cleaning:
[] Remoxe the oxen door using the
instructions in the
Lift-Off Oven
Door
section.
[] (;rasp oxen floor at the rear finger
slots on each side, lift it up, push it
back and pull it out.
V_ Clean the oven floor with warn/
soapy wateI:
IMPORTANT'.Mwa)s replace the
remox d)le floor befin'e the next use.
?5