Projecting Rgb Video Images - Epson EMP-800 User Manual

Connecting to a Video Source

Projecting RGB Video Images

RGB video is used when RGB signals that have copy protection added are input
and projected.
• Use the accessory computer cable to connect the video source to the
Computer 2/Component Video port at the rear of the projector. Alternatively,
use the optional DVI analog cable to connect the video source to the
Computer 1 port at the rear of the projector.
See " Appendix: Optional Accessories" (P.100)
• If you would like the sound to come out of the projector's built-in speaker, use
the accessory A/V cable (red/white) to connect the video source to the Audio
2 port at the rear of the projector. Alternatively, use a commercially-available
audio cable to connect the video source to the Audio 1 port at the rear of the
projector. Use either method depending on the shape of the video source's
audio output port and on the type of cable you have.
When the video equipment's audio output port is an RCA pin jack
When the video equipment's video output port is a mini D-Sub 15-pin port
To audio output L port (white)
To audio output R port (red)
When the video equipment's audio output port is a stereo mini jack
When the video equipment's video output port is a DVI-I port
To RGB output
port
32
To RGB output
port
Computer cable
(accessory)
A/V cable (white/red)
To audio output
port
Audio cable
(commercially-available)
DVI analog cable (optional)
To Computer 2/Component
Video port
(accessory)
To Computer 1 port
To Audio 1 port
To Audio 2 port
(white/red)