Brother MFC-J4310DW Software User's Manual page 220

Network Scanning
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on a computer that is
connected to the machine.
k
Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page
Remove Background Color as needed.
1
(For MFC-J4710DW)
l
Press OK.
m
Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a
Load your document.
b
Press Scan.
c
Press s or t to display Scan to Image.
d
Press Scan to Image.
e
Press s or t to display the computer you want to send to.
f
Press the computer name.
If the LCD prompts you to enter a PIN number, enter the 4-digit PIN number for the computer on the LCD.
Press OK.
Do one of the following:
 If you want to use the default settings, go to k.
If you want to change the default settings, go to g.

g
Press Options.
h
Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on a computer that is
connected to the machine.
i
Choose the settings for Scan Type, Resolution, File Type and Remove Background as
needed.
j
Press OK.
k
Press Start.
The machine starts scanning the document.
1
and
13
13
212