Scan To Network (Windows ) - Brother MFC-J4310DW Software User's Manual

Network Scanning
b
Press Scan.
c
Press s or t to choose Scan to FTP.
d
Press Scan to FTP.
e
Press s or t to choose one of the FTP server profiles listed.
 If the Scan to FTP profile is complete, go to f.
 If the Scan to FTP profile is not complete, the LCD prompts you to enter any missing information.
When you finish the settings, go to f.
f
Press Start.
The LCD shows Connecting. When the connection to the FTP server is successful, the machine starts
scanning the document.
If you are using the scanner glass, the LCD displays Next Page?. Press Yes or No.
Scan to Network (Windows
When you choose Scan to Network, you can scan documents directly to a shared folder on a CIFS server
located on your local network or the internet. Refer to the guide noted below for more information about CIFS
servers.
See Network User's Guide.
The Scan to Network feature supports NTLMv2 authentication.
The details required to use Scan to Network can be entered by using Web Based Management to
preconfigure and store the details in a Scan to Network profile. The Scan to Network profile stores user
information and configuration settings for use on a network, or the internet.
NOTE
• Scan to Network is available when Scan to Network profiles are configured by using Web Based
Management.
• YOU MUST CONFIGURE THE SNTP PROTOCOL (NETWORK TIME SERVER), OR YOU MUST SET
THE DATE, TIME AND TIME ZONE CORRECTLY FOR AUTHENTICATION. FOR MORE
INFORMATION: See Network User's Guide.
• We recommend Microsoft
are always enabled in whichever browser you use. If a different web browser is used, make sure it is
compatible with HTTP 1.0 and HTTP 1.1.
To use Web Based Management, type http://xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP
address of your machine) into your browser and then you can configure or change the settings in
Scan to FTP/Network in the Scan tab. You can configure up to five Scan to Network profiles and you can
choose what profile numbers (1 to 5) to use for Scan to Network settings in Scan to FTP/Network Profile.
In addition to the seven preset file names you can store two user defined file names that can be used for
creating a Scan to Network profile.
®
)
® ®
Internet Explorer 8.0/9.0. Please also make sure that JavaScript and Cookies
13
13
221