Brother MFC-J4310DW Software User's Manual page 200

USB cable scanning
g
(For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
h
Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on the computer that is
connected to the machine.
i
Choose the settings for Skip Blank Page
1
(For MFC-J4710DW)
j
Press OK.
k
Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a
Load your document.
b
Press Scan.
c
Press s or t to display Scan to OCR.
d
Press Scan to OCR.
Do one of the following:
 If you want to use the default settings, go to i.
 If you want to change the default settings, go to e.
e
Press Options.
f
Press Set with TouchPanel.
Press On.
NOTE
To use Set with TouchPanel, the ControlCenter software must be installed on the computer that is
connected to the machine.
g
Choose the settings for Scan Type, Resolution and File Type as needed.
h
Press OK.
i
Press Start.
The machine starts scanning the document.
1
, Scan Type, Resolution and File Type as needed.
12
12
192