Brother MFC-J4310DW Software User's Manual page 198

USB cable scanning
c
Swipe left or right to display
d
Press (to Image).
The icon moves to the middle and is highlighted in blue.
e
Press OK.
Do one of the following:
If you want to use the default settings, go to k.

If you want to change the default settings, go to f.

f
Press Options.
g
(For MFC-J4710DW)
If you want to use 2-sided scanning, press 2-sided Scan.
Press 2-sided Scan: Long Edge or 2-sided Scan: Short Edge.
h
Press Set with Touch Panel.
Press On.
NOTE
To use Set with Touch Panel, the ControlCenter software must be installed on the computer that is
connected to the machine.
i
Choose the settings for Scan Type, Resolution, File Type, Skip Blank Page
Remove Background Color as needed.
1
(For MFC-J4710DW)
j
Press OK.
k
Press Start.
The machine starts scanning the document.
For MFC-J4310DW/J4410DW/J4610DW
a
Load your document.
b
Press Scan.
c
Press s or t to display Scan to Image.
d
Press Scan to Image.
Do one of the following:
 If you want to use the default settings, go to i.
 If you want to change the default settings, go to e.
e
Press Options.
(to Image).
1
and
12
12
190