Projecting All Image And Movie Files In A Folder In Sequence (Slide Show) - Epson EMP 1815 Operation Manual

Projecting Image and Movie Files
• JPEG format images can be rotated during projection.
q
s p.47
• You can make the following operations using the remote
control while playing movie files. However, you cannot
fast-forward and rewind MPEG1 movie images.
Fast-forward: Tilt the [h] button to the right
Rewind: Tilt the [h] button to the left
Freeze (Pause): Tilt the [h] button down
Three fast-forward/rewind speeds are available, and the
speed changes each time the button is pressed.
To return to normal playback, press the [Enter] button.
Audio is not output while fast-forwarding, rewinding, or
pausing is in progress.
Projecting all Image and Movie Files in a Folder in
Sequence (Slide show)
You can project the image and movie files in a folder in sequence, one at a
time. This function is called "Slide show". Perform the slide show by the
following procedure.
You can set display conditions, such as projecting
q
repeatedly and adding effects to the display when files are
being switched. To change the movie files and image files
automatically when you run Slide show, set the screen
switching time in the PC Free option menu to anything
other than "No". Default setting: "No"
Procedure
A
B
s p.53
Start PC Free. s p.42
The content of the connected digital camera, USB storage device or
CompactFlash card is displayed.
Tilt the [h] button on the remote control to position
the cursor on the folder to perform the slide show.
For Quick Mode
(1) The folder opens.
(2) Select Slide show at the bottom right and press the [Enter]
button
For Guide Mode
(1) The sub menu is displayed.
(2) Select "Play Slide Show" and press the [Enter] button.
51