Projecting All Image And Movie Files In A Folder In Sequence (Slide Show) - Epson EMP-1825 Operation Manual

Projecting image and movie files
• JPEG format images can be rotated during projection.
q
s p.57
• You can make the following operations using the remote
control while playing movie files.
Fast-forward: Tilt the [ h ] button to the right
Rewind: Tilt the [ h ] button to the left
Freeze (Pause): Tilt the [ h ] button down
Three fast-forward/rewind speeds are available, and the
speed changes each time the button is pressed.
To return to normal playback, press the [Enter] button.
Audio is not output while fast-forwarding, rewinding, or
pausing is in progress.
Projecting all Image and Movie Files in a Folder in
Sequence (Slide show)
You can project the image and movie files in a folder in sequence, one at a
time. This function is called Slideshow. Perform the Slide show by the
following procedure.
You can set display conditions, such as projecting
q
repeatedly and adding effects to the display when files are
being switched. To change the movie files and image files
automatically when you run Slide show, set the screen
switching time in the PC Free option menu to anything
other than "No". Default setting: "No"
Procedure
A
Start PC Free. s
The content of the connected digital camera, USB storage device or
CompactFlash card is displayed.
p.62
s
p.53
B
Tilt the [h] button to move the cursor to the folder
containing the slide show, then press the [Enter]
button.
C
Select "Slideshow" in the bottom right corner of the
screen, and then press the [Enter] button.
The Slide show starts.
When the last file is projected, the file list is displayed again
automatically. If you set "Continuous Play" to "On" in the Options
window, projection will start from the beginning again when the end
is reached. s p.62
Just as with a scenario, you can proceed to the next screen, return
to the previous screen, or stop playback during projection of a Slide
show. s "Operating During a Presentation"
If the screen switching time setting has been set to "No",
q
the files will not change automatically when you run a Slide
show. Press the [Enter] or []] button on the remote control
to continue to the next file.
61
p.59