Epson EMP 1815 Operation Manual page 83

Troubleshooting
f Mail is not sent even if an abnormality occurs in the projector
Check
Is the wireless LAN unit connected?
Is the network connect setting correct?
Is "Standby Mode" set to "Network On"?
Did a fatal abnormality occur and the projector come
to a sudden stop?
Is power being supplied to the projector?
Is the network cable connected correctly?
For Wired LAN
Cannot control or monitor the projector with EMP Monitor
f
Check
Is the wireless LAN unit connected?
For Wireless LAN
Is the network connect setting correct?
Is EMP Monitor correctly installed in the computer?
Are all of the projectors that you want to monitor and
control registered to the projector list?
Is "Standby Mode" set to "Network On"?
Is power being supplied to the projector?
Is the network cable connected correctly?
For Wired LAN
Check that the wireless LAN unit is securely connected.
Check the projector's network settings.
sUser's Guide "Network Menu (EMP-1815 Only)"
To use the mail notification function when the projector is in standby, set "Network On" in "Standby Mode"
from the configuration menu. sUser's Guide "Extended"
When the projector comes to a sudden stop, mail cannot be sent.
If, after checking the projector, the abnormal state continues, contact your local dealer or the nearest address
provided in the World-Wide Warranty Terms.
Check that your electrical outlet or power source is functioning correctly.
Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected
properly.
Check that the wireless LAN unit is securely connected.
Check the projector's network settings.
sUser's Guide "Network Menu (EMP-1815 Only)"
Uninstall and then reinstall EMP Monitor.
Register them to the projector list. sEMP Monitor Operation Guide
To use the EMP Monitor when the projector is in standby, set "Network On" in "Standby Mode" from the
configuration menu. sUser's Guide "Extended"
Check that your electrical outlet or power source is functioning correctly.
Check that the network cable is connected correctly. Reconnect it if it is not connected or not connected
properly.
Remedy
Remedy
83