Management Using Snmp - Epson EMP 1815 Operation Manual

Management Using SNMP

By setting SNMP in the EasyMP network setting, notification
messages will be sent to preset e-mail addresses when a problem or
warning occurs with a projector. This is useful when controlling
projectors centrally at a point distant from them.
• SNMP should be managed by a network administrator or
q
someone who is familiar with the network.
• The SNMP function to monitor the projector requires
SNMP Manager to be installed on the computer.
• The managing function using SNMP cannot be used via a
wireless LAN in the Quick Connection Mode.
• Up to two destination IP addresses can be recorded, so that
if the notification message cannot be sent to the first IP
address specified, it will be sent to the second IP address
instead.
To set SNMP, select "SNMP" from network settings on the projector's
configuration menu. User's Guide "Network Menu (EMP-1815
s
Only)" "SNMP Menu"
38