Using The Toolbar; Icon Names And Functions - Epson EMP 1815 Operation Manual

Epson projector and software
Hide thumbs Also See for EMP 1815:
Table of Contents

Advertisement

Using the Toolbar

The toolbar is displayed when EMP NS Connection is started up and
the connection is made with the computer.

Icon Names and Functions

Select target
Displays the "Select target projector" dialog box.
projector
Deselect the check box for the projector you do
not want to operate.
Stop
Stops projection of computer images while
connecting to the projector. While projection is
stopped, a black screen is projected. Also, pause is
canceled.
Show
The projector starts to project the computer image.
Also, stop or pause is canceled.
Pause
Pauses projection of computer images when
connected to the projector.
Presentation
In this mode, only PowerPoint slideshow images
Mode
are projected by the projector.
Projector control Displays the Projector control screen. You can
perform "A/V Mute", "Switch PC Source", and
"Switch Video Source" from the Projector control
screen.
Preview
Displays the multi-screen preview screen.
Set options
Transmission performance during the transfer of
computer images can be adjusted.
Movie Sending
Displays the screen for selecting the destination
Mode
projector for Play Movie. Only one projector can
project movies.
Disconnect
Disconnects the connection to the projector.
Wireless
This is displayed when the connection is made in
indicator
the "Quick Connection mode". This displays the
ESSID signal strength. The stronger the signal
strength is, the number of lit indicators increases.
Switch toolbar
When a connection is made in the "Quick
display
Connection Mode", the toolbar display can be
switched to "Full", "Normal" and "Simple" in
order from the top as follows.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Easymp

Table of Contents