Before Connecting; Connection Procedure; Projectors - Epson EMP 1815 Operation Manual

Before Connecting

As well as projecting images from a computer via a network, you can
also monitor and control the status of the projector from a computer by
connecting in the advanced mode.
• Mail Notification Function
By using the mail notification function, notification messages will be
sent to preset e-mail addresses when a problem occurs with a
projector. s"Using the Mail Notification Function to Report
Problems"
• SNMP Function
By using the SNMP function, notification messages will be sent to
preset computers when a problem occurs with a projector.
"Management Using SNMP"
s
• Monitoring and Control Using EMP Monitor
By using "EMP Monitor" contained in the supplied "EasyMP
Software" CD-ROM, the status of multiple EPSON projectors on a
network can be displayed for confirmation on a computer monitor or
multiple EPSON projectors can be controlled from a computer.
EMP Monitor Operation Guide
s

Connection Procedure

At computer
Install the EasyMP software
s
(included) Wireless LAN Quick
Connection Guide
Make the network settings (wireless
LAN or wired LAN) s p.21
Start EMP NS Connection
(wireless LAN or wired LAN)
p.21
s
20
At projector
Connect the wireless LAN unit
s
Wireless LAN Quick
Connection Guide
or
s
Connect the LAN Cable User's
Guide "Connecting a LAN Cable"
Make the Advanced Mode
s
settings User's Guide "Network
Menu", Wireless LAN Quick
Connection Guide
Start EasyMP (connection standby
s
mode) Wireless LAN Quick
Connection Guide