Resetting The Lamp Usage Timer - Epson 810 User Manual

8. Gently insert the new lamp and tighten its screws.
Caution: Don't touch the glass portion of the lamp assembly. Touching the glass could result
in premature lamp failure.
9. Replace the lamp cover. (The projector won't work if the lamp cover is open or loose.)
10. Reset the lamp usage timer, as described below.

Resetting the Lamp Usage Timer

After replacing the lamp, plug the projector back in, turn on the power switch on the back,
and press the P
1. Press the
2. Use the menu navigation buttons to open the
.
Hours
3. When you see a confirmation prompt, highlight
4. When you're finished, press the
The lamp usage timer doesn't register until you've used the lamp for at least 10 hours.
52
Maintenance
button. Then follow these steps to reset the lamp usage timer:
Power
button on the projector or remote control.
Menu
menu, then select
Reset
Yes
button to exit.
Menu
Reset Lamp
and press the
Select
button.