Screen Options - Epson 810 User Manual

Screen Options

■ Message
Settings > Display > Message
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
■ User's Logo
Settings > User's Logo
Lets you display an image of your choice when the projector is warming up, not receiving
a signal, or when you press the
To capture the image, first set the projector to display the image you want to use. Then
select
User's Logo
Display Background setting to
Move the frame to select the
area you want to record
■ Startup Screen
Settings > Display > Startup Screen
Turn this setting off if you want to prevent your logo (see above) from appearing while
the projector is warming up.
■ Display Background
Settings > Display > Display Background
Changes the screen that's used when the projector is not receiving a signal or when you
press the
to display your logo on a black background.
Logo
44
Making Detailed Adjustments
and follow the instructions on the screen. When done, change the
button to temporarily stop projection. Select
Blank
button to temporarily stop projection.
Blank
, as described below.
Logo
Select the display ratio
Record
(instead of
Blue Black
) or