Deleting Saved Memory Settings; Resetting The Projector - Epson 810 User Manual

Deleting Saved Memory Settings

You can clear all your memory settings at once.
1. Press the
2. Open the
3. Press the

Resetting the Projector

If the image quality isn't what you expect, one or more settings may be adjusted improperly.
If necessary, you can restore the projector to its factory-default (original) settings.
To restore the settings in a specific menu (such as the Image or Settings menu), open that
menu, select
Picture menu settings:
Open the Picture
menu . . .
You can also reset the lamp usage timer or restore all the projector settings to their original
values. Follow these steps:
1. Press the
2. Open the
3. Do one of the following:
■
Select
You should reset the lamp timer only when you install a new projector lamp. See
page 52 for more information.
■
Select
Component, Save Memory, and Language).
42
Making Detailed Adjustments
button on the remote control.
Menu
menu, then select
Memory
button to delete the memory settings.
Select
, and confirm as needed. The example below shows how to reset the
Reset
button on the remote control.
Menu
menu.
Reset
Reset Lamp Hours
to return all projector settings to their original defaults (except
Reset All
Reset Memory
to clear the lamp usage timer and reset it to zero.
.
. . . and select
Reset