Setting Up the Projector
18
Connecting a Component Video Cable
If your video source has component video connectors, you can use
them to project a higher quality video image. However, you'll need a
component video cable, which can be purchased from EPSON
(ELPKC19).
Before starting, make sure the projector and your DVD player or
other video device are turned off.
1. Connect the large end of the component video cable to the
projector's
Computer/Component Video
2. Insert the three ends of the component video cable into the
and
ports on your video source.
B
3. After you turn on the projector, use the Video menu to set the
Input Signal to
YCbCr
information.
port.
or
. See page 40 for more
YPbPr
,
,
R
G