Adjusting The Image Shape - Epson PowerLite 720c User Manual

Adjusting the Image Shape

If the projected image isn't rectangular or has a "keystone" shape, do
one or more of the following:
If your image looks like
■
projector off to one side of the screen, at an angle. Move it directly
in front of the center of the screen, facing the screen squarely.
If your image looks like
■
has been disabled. You can correct this by turning on the Auto
Keystone feature or by manually adjusting the keystone correction
value. Follow the directions below:
To turn on Auto Keystone, press the
■
remote control. Use the directional buttons to select the
menu, then press
Setting
to highlight
Auto Keystone
the button to save your changes, then exit the menu by
Enter
pressing the
Menu
To manually adjust the keystone correction value, press the
■
or side of the
correct the shape of the image. After correction, your image
will be slightly smaller.
You can also perform electronic keystone correction using the
projector's Setting menu. See page 45.
or , you've placed the
or , the Auto Keystone feature
Menu
. Use the directional buttons
Enter
and to turn the feature on. Press
button.
button on the projector to
Keystone
Menu
button on the
Enter
Using the Projector
Power
Page down Page up
Computer S-Video/Video Color Mode
Menu A/V Mute Freeze
E-Zoom
Enter
Auto ESC
directional buttons
27