Connecting To A Laptop Computer; Connecting The Computer Cable - Epson PowerLite 720c User Manual

note
To connect to desktops and
other computer systems, see
Appendix A. If you have an
iBook with an RCA video-
out port, follow the
instructions for connecting to
a video device on page 16.
note
Laptop configurations vary.
See your computer manual
for the location of the ports
needed to connect your
projector.
Setting Up the Projector
12

Connecting to a Laptop Computer

You can connect the PowerLite projector to any computer that has a
standard video output (monitor) port, including PC notebook and
laptop computers, Macintosh PowerBooks and iBooks, and hand-held
devices.

Connecting the Computer Cable

Before you start, make sure your computer and the projector are
turned off.
1. Connect one end of the computer cable to the projector's
Computer/Component Video
2. Connect the other end of the computer cable to your laptop's
video-out or monitor port.
If you're using a PowerBook or iBook and you can't connect the
cable, you may need to use the Macintosh desktop adapter as
shown on page 79 (available from EPSON; see page 7).
3. Tighten the screws on the connectors.
If you don't need to make any other connections, you can plug in
your projector and turn it on. See page 20 for instructions.
port.