Adjusting The Display; Adjusting The Projection Size; Setting The Focus - Epson 1EMP-S1 User Manual

Adjusting the Display

Adjusting the projection size

The size of the projected image is basically determined by the
distance from the projector to the screen.
screen size" P.10
A
Press the [Wide] or [Tele] buttons on the control panel
to adjust the projection size.
[Wide] : increase the size
[Tele] : reduces the size
If you would like to enlarge the image further, move the projector
further away from the screen.
• The default setting is wide.
p
• The E-Zoom function lets you enlarge parts of the image.
s "E-Zoom" P.30
s "Projection distance and

Setting the focus

A Turn the focus ring to adjust the image focus.
• If the surface of the lens is dirty, or misted over as a result
p
of condensation, it may not be possible to adjust the focus
correctly. If this happens, clean or de-mist the lens.
s "Cleaning the lens" P.53
• If the projector is positioned outside the normal projecting
range of 87-1109 cm (2.9-36.4 ft.), it may not be possible to
obtain the correct focus. If you have trouble obtaining the
correct focus, check the projection distance.
EMP-S1 User's Guide
23