Adjusting The Projection Angle - Epson 1EMP-S1 User Manual

Basic Operation > Adjusting the Display

Adjusting the projection angle

Set up the projector so that it is at right angles to a screen.
Seen from the side
9.6
Centre of lens
1
Seen from above
If it is not possible to set up the projector so that it is at right angles to a
screen, it can be set up at a slight vertical angle instead. (Max 10°)
A Raise the front of the projector while pressing the feet
buttons on both sides.
Extend the front feet.
• The height can be adjusted by turning the base of the front
p
feet on either side.
• Press the front feet buttons on both sides and slowly lower
the projector down to return to its normal position.
EMP-S1 User's Guide
24