Epson 1EMP-S1 User Manual page 47

Troubleshooting > When You Suspect a Problem
f No images appear (Messages are displayed 1)
• Check the mode which corresponds to the
frequency of the image signals being output
from the computer.
"Not supported"
f No images appear (Messages are displayed 2)
• Has external video output been selected on
the computer?
• Is the input source properly selected?
"No signal"
• Are the cables connected properly?
• Is the power for the connected computer or
video source switched on?
Refer to the documentation provided with your computer for details on
changing the resolution and frequency of the image signals being output
from the computer. s "Supported Display Resolutions" P.66
When using a laptop or a PC with an in-built monitor, select external video
output on the computer.
s "Laptop connection" P.12
Press the [Source] button on the Control panel until the correct input
source is selected. For the remote control, press the [Computer] button or
the [S-Video/Video] button. s "Selecting the Input Source" P.26
s "Connecting to a Computer" P.12 , "Connecting to Video Equipment"
P.18
s "Turning on the Projector" P.20
EMP-S1 User's Guide
46