Craftsman 315.212380 Operator's Manual page 16

MOUNTING THE STAND-n-STOW
TM
CABINET
BASE TO THE LEG STAND
See Figures 9 - 11.
When the leg stand and Stand-n-Stow
TM
cabinet are not in
use, the leg stand can be folded up and placed in the leg
stand storage area as indicated in figure 11.
• Place the leg stand on the floor then open the leg
stand by pushing opposite legs in opposite directions
as indicated by the arrows in figure 9.
• Place the Stand-n-Stow
TM
cabinet on the leg stand,
Align the slots in the miter saw base with the slots on
the top of the leg stand.
• Insert the tab on the Stand-n-Stow
TM
cabinet locking
knob into the slot on the leg stand.
• Turn the locking knob clockwise to secure the Stand-n-
Stow
TM
cabinet to the leg stand,
• Repeat with the other three locking knobs.
1
STAND-N-STOW
TM
CABINET
LOCKING
KNOBS
SLOTS
Fig. 10
LEG STAND
STORAGE AREA
Fig. 11
Fig. 9
16